#1
I am currently replacing the diamondback humbucker in my strat with a dimarzio super distortion in the bridge and i'm not sure which coloured wires go where. I have no problem with the actual soldering of the thing, just where everything goes.

The new pickup has red, green, white, and black wires with another wire without a colour code.

Thanks.
My Gear:

Guitars:
Fender American HSS Stratocaster

Amps & Effects:
Hand-Wired JCM 800 2204
Hand-Wired V30 2x12 Cab
Keeley TS-9 Tube Screamer
ISP Decimator
EHX Holiest Grail
Modded Dunlop Crybaby
Boss RC-2 Loop Station
#2
On a Dimarzio the red is hot, the green and bare wires are ground, the black and white one get hooked together and taped off if you just want regular humbcker wiring. If you want to wire it up so you can coil split the pickup they get wire to the push/pull pot.