#1
Ok so i finally got the common sense enough to learn how to put a batterie in one of my newer guitar pedals (a boss MD-2), and then i hooked it up with my behringer multi fx (the fx600 model) (which i use a 9 volt adapter for) and i hooked it all up, and now for some reason its not working.... sighh... well can anybody suggest any troubleshooting things i could do? im kinda new to all this pedal stuff so please bear with me... im still very much a newb to guitar playing!!!
well thank you for your time!!!
I am a Stephenist
#2
Make sure your guitar goes into the INPUT of the first pedal, then a cable goes from the OUTPUT of the first pedal into the INPUT of the second pedal, then from the OUTPUT of the second pedal into the input of your amp.

╠═══════╬═══════╣

THE ARCHITECT σƒ τλε τρπ βπστλεπλσσδ

╠═══════╬═══════╣



drone/doom/post-metal: http://theygrieve.bandcamp.com
#4
Quote by xwearesinking
Make sure your guitar goes into the INPUT of the first pedal, then a cable goes from the OUTPUT of the first pedal into the INPUT of the second pedal, then from the OUTPUT of the second pedal into the input of your amp.

omfg that was the problem!!! i amm such an idiot!!! thanks man!!
I am a Stephenist
#5
ok thank you everyone! i am an idiot... well im gonna go jam now, cya!!!
I am a Stephenist
#6
Quote by 5150rando
omfg that was the problem!!! i amm such an idiot!!! thanks man!!

.....



......




.............





Lulz were had, at your expense. Thank you for playing