#1
My new G400 has a loose tone pot that when out of alignment messes up the pickup and turns it off, put as long as it is in place there isnt any problems so im not going to have it fixed just yet, any suggestions on what to do?
#3
You should be able to pull (gently) the knob off and tighten the Hex Nut underneath! While tightening though, you should open the control cavity and hold the pot itself to avoid having it spin and tear off wires!
Moving on.....
#4
Its probably already screwed up the connections inside from moving. Open it up and have a look. Thats the only real way to fix it.