#1
Hey,
I just restrung and resetup my floyd rose equipped guitar. I went from a 9 gage to a 10. My problem is I went to adjust my tremsetter and now my trem is very stiff and will hardly go up a full step. Also when I do bends the rest of my strings go flat.
Any help would be appreciated.
#2
Quote by jccpsoloist
Hey,
I just restrung and resetup my floyd rose equipped guitar. I went from a 9 gage to a 10. My problem is I went to adjust my tremsetter and now my trem is very stiff and will hardly go up a full step. Also when I do bends the rest of my strings go flat.
Any help would be appreciated.


If your tremolo system is not parallel to the guitar (i.e. it's sticking up in the air or down into the guitar) then you will need to adjust the spring tension until your tremolo is parallel to the guitar's body.

I actually have an Ibanez ZR Tremolo, so I'm not too familiar with how to do this on a Floyd Rose, but they should have a tutorial on YouTube.

Hope this was of some help!
#3
check youtube for vids or just go to http://www.ibanezrules.com/tech/setup/index.htm for the best advice and tutorials on trems EVER.
The Best Floyd Rose Is A Setup Floyd Rose!

Gear:
STARcaster Strat
Dean Tradition Acoustic
03 B.C. Rich NJ Warlock Speedloader
Xaviere XV-599
Epi 1984 Explorer
Crate GTD65
Epi Valve Jr
Bogner Alchemist Head
Marshall 1960B