#1
so right now im wiring my H-H flying V
only problem is, i cant remember how the wires went.

ive googled and all the diagrams on there are humbuckers with 4 wires coming out, mine have only 2 each, a red one and a bare one.

it has one volume pot, one tone and a 3 way, simple.
pleeeasssee somebody explain how these fit together, otherwise my soldering iron is gona burn through my bed

thanks.
#2
If it only has two wires wouldn't that be the same wiring as single coils?

Edit: What brand of pups are they?
My Gear:
Custom Fender 62' Reissue Strat
Carvin Custom Shop DC400T
Jackson SL3 Soloist
Fender Super-Sonic 112
Boss GT-10

Quote by XianXiuHong
000-000-000-000-000
PM------------------------


You can now play every Slayer song.
#3
Quote by bagrm
If it only has two wires wouldn't that be the same wiring as single coils?

Edit: What brand of pups are they?


maybe, how would i do that
#4
http://www.millerguitar.com/images/wiring/tele_style.jpg
Again posting what kind of pickups they are would help, I'm guessing they are p90's or something similar.
My Gear:
Custom Fender 62' Reissue Strat
Carvin Custom Shop DC400T
Jackson SL3 Soloist
Fender Super-Sonic 112
Boss GT-10

Quote by XianXiuHong
000-000-000-000-000
PM------------------------


You can now play every Slayer song.
Last edited by bagrm at Jan 24, 2009,
#7
right i think im goin for red to somewhere on the selector and black to the ground on the side of the selector, or somewhere.

ill post if it works, if anybody cares.
here goes nothin!
#8
Those three lugs in the middle are your inputs... one pickup to the top, one to the bottom, then the centre is the common return... the other little bits are crimps to keep the casing on. Solder the bare wire to the case.
#9
remember bare wires or bare web shrouds always equal ground and get soldered to the pot housing
Last edited by JerseyBird97 at Jan 25, 2009,