#1
I'm sure there has been a thread along these lines but I couldn't find any so...

I have a DiMarzio Split P pickup that I want to put in my bass but I've never swapped out pickups. So, are there any good tutorials on the web that you have come across?
#2
Quote by Larce
I'm sure there has been a thread along these lines but I couldn't find any so...

I have a DiMarzio Split P pickup that I want to put in my bass but I've never swapped out pickups. So, are there any good tutorials on the web that you have come across?


http://www.seymourduncan.com/support/wiring-diagrams/schematics.php?schematic=std_pbass

http://www.seymourduncan.com/support/wiring-diagrams/

And bookmark the last link, it has nearly every type of wiring you'll ever need

EDIT ; if you've never soldered before, practice with standard wires. Then try and solder the wire into something metal. Make sure you practice this first before going near the instrument!
Last edited by Micehorns at Feb 3, 2009,
#3
Thanks a lot, I will definitely need some practice first.


I also <3 Daniel Johns.