#1
I have Peavey Valveking 212 amp, it's about 4 months old, worked fine until now. Last time I used it it worked perfectly, sound and everything was okay. After the last playing I tried to play through it again but it just doens't work. Everything seems fine, a technician already searched for a mistake, but he couldn't find any. Any suggestions what could be broken?
#2
an amp tech should be able see whats wrong with the amp.

do the power tubes glow when you turn the amp on?
My gear:
PRS SE custom
~!~--Peavey XXX super 40 EFX --~!~
Peavey VK 112

===WGS Vet30
===JJ power tubes

---Pedals:
-ISP Decimator
-Digitech Bad Monkey
-Crybaby wah
-Korg Pitchblack
-Danelectro FnC EQ
#3
Quote by DaddyBarbs
an amp tech should be able see whats wrong with the amp.

do the power tubes glow when you turn the amp on?


no, they won't get warm either. But he said that tubes aren't broken.
Last edited by lastrelapse at Mar 2, 2009,
#4
Get a better tech!

Did you check the fuse? Or maybe your tubes are dead. Stock tubes usually don't have a long life.
If you start a reply with: I have never played one but I have heard good things about it! Your opinion is invalid.
#6
Probably the HT fuse. It's buried in the chassis. If an amp tech doesn't know to look for that, then he should instantly be hung out to dry. If he has looked for that and found nothing wrong, then it sounds like you're SOL. Except that your amp is only 4 months old and you can try to make a warranty claim.
I'm putting my GAS on hold
for a couple months in order to pimp my ride.


Don't judge me.