So basically my Peavey Valveking 212 has stopped working, can anybody please help me?

The other day, when I flicked the switch to turn it on (Just on to standby) there was a pop, and the standby light flashed on, then stayed off. The amp "died" and there was lights or sound or anything.
The fuse in the back of the amp was broken, so i replaced it a few days later and tried it again, and the same thing happened.

The amp is not particuarly new or old (5/6 months) and has only been used for bedroom practices.

Can anyone point me in the direction of what might be the problem? I am good with guitar electronics, but the inner workings of an amp are a mystery to me.

Any help much appreciated!

It's just a drop in the biggest ocean I know I've ever seen
And in a moment it's big enough to drown the whole world...
There are about 401 different things that could cause that. Take it into a tech.
Quote by kcdakrt
DLrocket89 makes my ug experience better!

Member of the official GB&C "Who to Listen to" list

Kit Amp Building Tutorial
agreed - that could be a symptom of a bunch of problems.
Main Gear List:
Jackson RR7
Agile AL-3100 Double Bound
1977 Fender Jazz Bass
Blackstar HT-5
peavey bass amp
EHX Metal Muff
Ibanez Weeping Demon Wah
Danelectro 7-band EQ
k, then.

here's a schematic of your amp.
power supply is on page 9

not much before the standby switch.
Power transformer,
4 diode
4 capacitors
wiring going to the CT of your Output Transformer.

loud pop might have been one of the diodes.
maybe one of the caps, but usually it stinks like hell when one explodes.

the noise could have been something else, even an output tube socket arcing.

taking this to a tech is not a bad idea, unless you really know what you're doing.
there are high enough voltages in there to kill you.
Quote by Jackal58
I release my inner liberal every morning when I take a shit.
Quote by SK8RDUDE411
I wont be like those jerks who dedicate their beliefs to logic and reaosn.
Last edited by SomeoneYouKnew at Mar 12, 2009,