#1
A while a bought a Boss PSA power adaptor for use with my DS-1. Anyway recently it stopped working, I don't know what happened, one day it just didn't work. There was no crazy smoke, just one day it didn't work. I'm not sure what to do.

Has anyone experienced a similar problem...?

I thought about opening it up to have a look but it has some unusual screws on the back, any idea how to get them off?
The gear:

* Epiphone Les Paul Custom
* Schecter Jeff Loomis Signature 7 String
* Fender Squier P Bass
* Blackstar Stage HT-60
* Original Crybaby
* EHX Small Clone
* Boss DD-3
#2
maybe a break in the cable..?
Quote by Demonikk
'Practice amp' = amp you practice with? In my case, Peavey 6505+ and 4x12
I don't do things small


Except children.
#4
You could hook up a multimeter to the PSA to make sure its that and not the pedal. Could also be a fault 1/4 input on the pedal.
Line 6 SpiderValve 112 - Strymon SV Pre; G12-K100
Ibanez RG Custom Built - Seymour Duncan JB/Jazz
Line 6 M13
#6
That happens alright. They tend to bend and break where the cable meets the plug. If that's not the case, try the adaptor in another pedal and see if it works - if it does then your pedal is broken.
#7
it doesn't work in my crybaby or DS-1. I'll get my hands on a mutilmeter, there $50 AUD but there's no way I'm buying another one of those pieces of ****. It's like $150 or so for a powerbrick so Imma get one, especially since I'm a massive EHX and Fulltone fan and I plan to buy a lot of their pedals.
The gear:

* Epiphone Les Paul Custom
* Schecter Jeff Loomis Signature 7 String
* Fender Squier P Bass
* Blackstar Stage HT-60
* Original Crybaby
* EHX Small Clone
* Boss DD-3