#1
Hey guys, I'm replacing the copper(brass) FR bridge anchor sleeves with OFR hardened steel ones. The originals were not glued in. Should I glue these in and if so with what kind of glue?

Edit: I tossed some wood glue on them and ran them in. Thanks anyways.

I also just did my first fret level. Wow, that ****s easy. Still have to buy a crowning file but I didn't hardly take that much off. Just tapped the high frets in with a 6 oz plastic hammer. A quick couple of passes with a very straight 8" mill file then sanding with 600 paper and steel wool.

Cool, I'm learning.
Last edited by Sin City Sid at Mar 15, 2009,