#1
I have a Vox 847 A.
It had been squeaking pretty loud, so I decided to spray some WD40 in it.
The squeak stopped, but now the Wah pedal won't stay up.
What do i do?
Please help.
Thanks in advance.
#3
Tighten the two nuts circled. You'll likely need to lift the pcb to get to the one circled in black.

#7
ummmm it should.


we are talking about putting said lubricant on the wah pot, right? that's what i've been going off of this whole time.

now that i think about it, it sounds like you mean the hinge near the heel-side of the wah. WD-40 should have done the trick, and shouldnt have made it "too lubricated" to not stay in a fixed position.
#8
well, yeah it was the heel I sprayed and after that it won't stay in fixed position
#10
DW40?? There is grease in the wah-wah pedal just use the grease in the pedal and put it back on the top in the first place.
I'M BACK IN THE SADDLE
#11
yeah it's been like 3-4 weeks and still having the problem it's hard to wipe the wd-40 from the heel of the pedal I don't know what to do