#1
So I finally got my JB JR. today for my bridge position, i open up the face plate of the guitar and notice the stock on has two wires, i look and the JB JR. and it has five! a bare, a green, a red and a white and a black! i took out the stock single coil pick up and now want to install my single coil size humbucker but i have no idea where to solder the wires! please help!
#2
bare and green to ground
red and white soldered together and taped off
black to switch
i used to be a mod, then i took an arrow in the knee.
#3
does grounded mean they are solderd to the volume part because i just now found a diagram showing what you just told me.

Thank you so much by the way
#4
yup just solder them to the back of the pot.
i used to be a mod, then i took an arrow in the knee.