#1
I got a Crate 1200H Half Stack, with the crate g412a cabinet, for a really cheap price($100USD)..and I have a few questions

1. The amp says it takes a minimum load of 4ohms, but the cabinet is 8ohms. Does that mean, that the speakers are only recieving 60w, instead of the 120w the amp puts out at 4ohm?
2. The amp only has 1 speaker output on the back, and in most pictures from crate, it shows it as a full stack. I have a 2x12 speaker cabinet, with 2 8ohm 75w RMS each speakers in it, I want to know if there is a way to connect both cabs, with like a Y connecter, and how would I go about doing that.
Fender Custom Shop Telecaster
Fender Tom DeLonge Signature
Gibson ES-339
Mesa/Boogie Single Rectifier
Marshall JCM900 1960a Lead 4x12
#2
nobody can help me?
Fender Custom Shop Telecaster
Fender Tom DeLonge Signature
Gibson ES-339
Mesa/Boogie Single Rectifier
Marshall JCM900 1960a Lead 4x12
#3
You don't need a Y connector. You'd daisy chain the cabs together with the output on the first cab.
Quote by DeathByDestroyr
What the hell is a G&L.



Quote by Flux'D
Gay & Lesbian I think, the box smelled funny
Greg what did you send me??
#4
wait cabs have an output? Which ones which?
Fender Custom Shop Telecaster
Fender Tom DeLonge Signature
Gibson ES-339
Mesa/Boogie Single Rectifier
Marshall JCM900 1960a Lead 4x12