#1
Hey guys, I have an American Ampeg J-20 Jet here that's set to take 110V (USA standard). Now as our power over here is 220V, I would like to know what would need to be done to let me use it over here?


¦ Epiphone Sheraton II ¦ GFS Mean 90s ¦ Ampeg J-20 ¦
¦ Fulltone OCD ¦ MXR 6-Band EQ ¦ Behringer Chorus ¦ Artec Analog Delay ¦ EHX Holy Grail ¦
#3
You need to change the fuse, take the amp to a tech. It shouldn't be very expensive...
Even God has a Hell, his love for Humanity.
by Friedrich Nietzsche

Call me Edge
#4
a new transformer

edit: youll need more than just a new fuse, too
Quote by evening_crow
As far as i know the only liquor that should not be stored after opened is wine, and even then it's mainly the french one. American wine usually has conservatives in it to stop this.
Last edited by htsktim91989 at Jul 7, 2009,
#5
megan fox
My gear
Epiphone Les Paul Standard
B-52 LS100 Half Stack
Dunlop SW30 Slash Signature Wah
Digitech Hardwire CR-7 Stereo Chorus
Digitech Hardwire DL-8 Delay/Looper
Boss BD-2 Blues Driver
Fender CD220CE Acoustic
#6
1 - change the line cord or plug on the end of the line cord
2 - replace the 1 amp fuse with a 1/2 amp fuse
3 - move the power input from the 115v tap of the PT to the 230v tap
4 - done.


http://www.prowessamplifiers.com/schematics/images/J20%20Schem%20w%20transformer.pdf


Quote by DKMfreak410
megan fox
*reported*
Meadows
Quote by Jackal58
I release my inner liberal every morning when I take a shit.
Quote by SK8RDUDE411
I wont be like those jerks who dedicate their beliefs to logic and reaosn.
#7
Quote by SomeoneYouKnew
1 - change the line cord or plug on the end of the line cord
2 - replace the 1 amp fuse with a 1/2 amp fuse
3 - move the power input from the 115v tap of the PT to the 230v tap
4 - done.


http://www.prowessamplifiers.com/schematics/images/J20%20Schem%20w%20transformer.pdf



¦ Epiphone Sheraton II ¦ GFS Mean 90s ¦ Ampeg J-20 ¦
¦ Fulltone OCD ¦ MXR 6-Band EQ ¦ Behringer Chorus ¦ Artec Analog Delay ¦ EHX Holy Grail ¦