#1
I put the gauge on my strings from 9 to 10. My bridge is now being pulled way too far over towards my headstock. How do I fix this?
#3
or you can tighten the screws holding the springs in... check the ultimate set-up guide over in electric guitar forum, and Jenny will help.
Quote by Cathbard
Quote by Raijouta
Unless its electronic drums.

BURN THE WITCH!!!!!
#4
Quote by imbaguitar
add more springs in the back of the bridge. you probably have 3 right now?


You can also tighten the screws in back holding the bridge to the body, that will bring the bridge down.
Between the velvet lies, there's a truth as hard as steel.
The vision never dies, life's a neverending wheel.
#5
If you went from 9's to 10's, I would just tighten the screens that hold the trem. Don't overtighten them, and also make sure they're even. If you don't like how loose your trem is, you could also add another string, probably bringing it to 4 total.
Fender '04 Strat
MiM Sunburst with Maple Neck

Ibanez TS-808
Fender Blues Junior
Marshall JTM60