#1
Hey

I'm trying to wire my guitar with the following diagram:

http://www.guitarelectronics.com/product/WDUHSH5L1101

I've followed it and everything is wired as it says [with good solder joints].

Now my problem is that when in position 2/3/4 on the switch, I get nothing [position 1 and 5 seem to work, I get sound from the right humbuckers]

Any idea what I'm doing wrong?

Note: The single coil pickup actually has more wires than what is shown in that diagram, it actually has the same color codes as the humbuckers I'm using, which is confusing to me.
Nicks and dents are battle scars...they give a guitar history.


Quote by Homer Simpson
When you think about it, mud is just wet dirt.
#2
dead middle humbucker? or maybe the second tone pot is shot....
Epiphone Les Paul Ultra II(
"Epicaster" pimped out strat
Fender Blues Jr.
DeltaLab RD1 Rock distortion
Barber handmade USA Direct Drive Overdrive
DeltaLab Stereo chorus
MXR 6 band EQ
#4
Well all of it is brand new actually.

I wired the single coil pickup the same way the humbuckers are wired [considering it had the same exact wires]...is that wrong?
Nicks and dents are battle scars...they give a guitar history.


Quote by Homer Simpson
When you think about it, mud is just wet dirt.
#6
Ah...the Seymour Duncan wiring cleared up a mistake I didn't notice with the other diagram haha, thanks for the help guys.
Nicks and dents are battle scars...they give a guitar history.


Quote by Homer Simpson
When you think about it, mud is just wet dirt.
#7
no problem (:
My Rig:
Gibson SG Classic (Heritage Cherry)
Crate V1512
Roland Cube 15
Dunlop JH-01 Jimi Hendrix Wah