#1
So reading a couple forumns from the past on here... I started confusing myself about how i should be setting up my ohmage.

I run my Peavey 6505+ through my Mesa Rectifier cab which has 8 Ohm Mono, and two 4 Ohm inputs for Stereo... My head is interchangable for 4 ohms to 8 ohms to 16 ohms...

what is the PROPER way to set this up... Just to make sure I'm setting it up right


...like i need another amp problem

Peavey 6505+ Head
Mesa/Boogie Oversized Rectifier 4x12 Cab
Schecter Diamond Series 006
Ibanez SZR720 TGB
Boss TU-2 Chromatic Tuner
Boss NS-2 Noise Suppressor
Roland Micro Cube 10watt
#2
bump
Peavey 6505+ Head
Mesa/Boogie Oversized Rectifier 4x12 Cab
Schecter Diamond Series 006
Ibanez SZR720 TGB
Boss TU-2 Chromatic Tuner
Boss NS-2 Noise Suppressor
Roland Micro Cube 10watt
#3
have it set at 8ohm on the amp, and plug it into the 8ohm mono input.
TO ALL MY KILLERS AND MY HUNDRED DOLLAR BILLERS...
...TO EMO KIDS THAT GOT TOO MANY FEELINGS
#4
even if there's two paralleled jacks in the head?
Peavey 6505+ Head
Mesa/Boogie Oversized Rectifier 4x12 Cab
Schecter Diamond Series 006
Ibanez SZR720 TGB
Boss TU-2 Chromatic Tuner
Boss NS-2 Noise Suppressor
Roland Micro Cube 10watt
#5
Quote by 555_Maggot_666
even if there's two paralleled jacks in the head?

I believe that would be for playing in stereo (2 cabinetss). I have the same setup for my Bugera 6260, and I run it like I said in my first post.
TO ALL MY KILLERS AND MY HUNDRED DOLLAR BILLERS...
...TO EMO KIDS THAT GOT TOO MANY FEELINGS
#6
alright awesome!
thank you so much
Peavey 6505+ Head
Mesa/Boogie Oversized Rectifier 4x12 Cab
Schecter Diamond Series 006
Ibanez SZR720 TGB
Boss TU-2 Chromatic Tuner
Boss NS-2 Noise Suppressor
Roland Micro Cube 10watt
#7
Quote by 555_Maggot_666
alright awesome!
thank you so much

no problem man.
TO ALL MY KILLERS AND MY HUNDRED DOLLAR BILLERS...
...TO EMO KIDS THAT GOT TOO MANY FEELINGS