#1
Hey guys, i bought a set of MIM strat tuners to go on a knock off strat, I didnt really pay attention to it but the knock off tuners are attached by a screw to the headstock while the MIM tuners dont have the screw, they have two raised peices that actually go into the headstock. Any idea how I could make this work?
Quote by letsgocoyote
No I'm not Jesus. I would aspire to be though. I think under circumstances he would let you pay less if you needed to.
#2
You need to carefully and accurately drill holes in the headstock to accommodate the locator pins.
Meadows
Quote by Jackal58
I release my inner liberal every morning when I take a shit.
Quote by SK8RDUDE411
I wont be like those jerks who dedicate their beliefs to logic and reaosn.
#3
Any specific length I have to drill in the headstock?
Quote by letsgocoyote
No I'm not Jesus. I would aspire to be though. I think under circumstances he would let you pay less if you needed to.
#4
before you drill the holes, put a tiny bit of ink/paint or something on the locators, and push the new ones in, so the paint marks where you need to drill

Drill only the length of the pins.
#5
Thanks guys, I followed what you said and went ahead and installed them.
Quote by letsgocoyote
No I'm not Jesus. I would aspire to be though. I think under circumstances he would let you pay less if you needed to.