#1
I got some plywood
Building a case!
And board.

Are these dementions good?

24x18x8
(Length-Width-Height)
FOR THE CASE
And then the board 23.5x17.5x7.5??

Also, what do I need for a pedal supply?

Can someone post a drawing or diagram/blueprint for the case/board?

Thanks!
Band: My Own Virus
Location: Canada
Guitar: Schecter Omen 6
Desired Guitar: Feneder Jaguar 62' Olympic White or Brown Sunburst
and
Schecter Hellraiser 6
#2
If you run mostly 9vdc pedals, and run less than a total of 200mA, you can simply use a Boss power supply and a daisy chain. Other alternatives is the Dunlop DC Brick. Other than that, you simply build the board as big/small as you see fit for your set of pedals. Whatever feels comfortable to use.
Electrics:ˑˑˑˑˑˑˑˑˑˑˑˑˑˑAmps:
Jackson DKMGFFˑˑˑˑˑˑˑˑˑˑRandall RG100SC G2
Washburn DIME 333ˑˑˑˑˑˑˑRandall RH200X / RA412 2x Half-Stacks
ESP LTD EC-1000 STCB
Dean From Hell CFH
#3
I have 3 pedals ATM and hope to have 9 mostly boss
Boss DS1
Boss OS1
Boss TU2
Boss DD20
Ibanez CS9
Ibanez FL9
Fender BD
Cry baby Wah
Fender footswitch
AB Box
Band: My Own Virus
Location: Canada
Guitar: Schecter Omen 6
Desired Guitar: Feneder Jaguar 62' Olympic White or Brown Sunburst
and
Schecter Hellraiser 6
#5
Looking for dimensions...And like diagram not power supply ATM
Band: My Own Virus
Location: Canada
Guitar: Schecter Omen 6
Desired Guitar: Feneder Jaguar 62' Olympic White or Brown Sunburst
and
Schecter Hellraiser 6
#6
DS1 is 4mA
OS1 is about 12mA
TU2 is 55mA
DD20 is 200mA

Most wah's draw less than ~1mA
The ibanez and fender pedals, I don't know.
You'll either need at least 2 200mA AC adapters, OR, a AC-9VDC powersupply that delivers more than 300-400mA.

EDIT: Dimensons is hard to know for us.
Are you planning on having them all in one row, 2 or more rows or levels, how close together are you putting them etc.. Are you going to have only the 3 pedals you have, or are you planning for 9 etc...
Specifics helps you know
Electrics:ˑˑˑˑˑˑˑˑˑˑˑˑˑˑAmps:
Jackson DKMGFFˑˑˑˑˑˑˑˑˑˑRandall RG100SC G2
Washburn DIME 333ˑˑˑˑˑˑˑRandall RH200X / RA412 2x Half-Stacks
ESP LTD EC-1000 STCB
Dean From Hell CFH
Last edited by SinnaSatan at Aug 22, 2009,
#7
I want it to be big enough...I gave dimensions above are they good for all 9? It'll be two rows, one level on a removeable board from the case. and as close as needed
Band: My Own Virus
Location: Canada
Guitar: Schecter Omen 6
Desired Guitar: Feneder Jaguar 62' Olympic White or Brown Sunburst
and
Schecter Hellraiser 6
#8
I don't know. It all depends on how wide the pedals are, how close you want them etc.. My suggestion is to draw it out or model it with Sketchup or something.
Place the pedals at a comfortable space on the floor. Now, since you only have 3, measure the width of the 3 pedals lined up like you'd want them, and multiply your way from there up to how wide you think you need.
Electrics:ˑˑˑˑˑˑˑˑˑˑˑˑˑˑAmps:
Jackson DKMGFFˑˑˑˑˑˑˑˑˑˑRandall RG100SC G2
Washburn DIME 333ˑˑˑˑˑˑˑRandall RH200X / RA412 2x Half-Stacks
ESP LTD EC-1000 STCB
Dean From Hell CFH