#1
I have a Korg D1600MK2 and would like to run it through the monitor system instead of using headphones so the entire band can hear what I am doing. The problem is I need powered speakers, which I dont have. I would assume I could run it through the PA system we usually use for vocals, I just need to know which inputs to use so I dont screw up anything.

The PA system is a Peavey Xr 600e

Thanks in advance
Ibanez Universe w/ EMG 707 > Ibanez TS9 > Boss NS2 > Peavey xxx > custom 4x12 w/ 2 veteran 30's & 2 et65's
#2
use the tape ins
jackson dk2 2008
hamer xt sunburst qt
epiphone g400
peavey vk212
morley p wah
behringer pb1000
dige bm
big muff ny
behringer dc 9 comp
member of the Jackson/Charvel Owners Club

£8.50/58fund for a ROCKTRON HUSH SUPER C PEDAL
#3
If it runs off a mixer plug your 2 mono outs into 2 of the mono jack ins on the mixer and pan each full left and right. If you're running straight into the speaker then it's whatever works.
Quote by Tombe
With pedals you can throw your guitar down for an impromptu pedal drone solo, whereas if you did that on a rack it would just look like you were programming your washing machine.