#1
i have cort x-2 with a full action 2 bridge (they suck) the little adjustment things stripped and im now screwed. do i need new bridge saddles, if so which ones, or a new bridge, again if so which one.
and i was also wondering of a floyde rose would work in my guitar.
i need all the advice i can get
#2
Please note: All answers are limited to how you've described this problem so far.

1. You could get new saddles and they would work, Allparts sells ones that should work

2. If you get a new one, you need a "vintage" style one. (i.e. one with 6 screw holes) Again, Allparts has good ones, as does Stewmac and almost any guitar parts site.

3) You could add a Floyd Rose, although you would need to route for it. Templates are everywhere, including on here and Project Guitar. There is also a specific thread for this question, ask there.
R.I.P. Les Paul, 1915-2009

A man chooses, a slave obeys.
#4
I may have come off a bit douche-y with that last one, so I'll add this: You can use a "modern" styled two-post trem, but you would need to dowel and re-drill the screw holes (which is a real pain-in-the-ass )
R.I.P. Les Paul, 1915-2009

A man chooses, a slave obeys.