#1
Right guys, here is my problem.

I run my guitar into my Toneport UX2, and for my amp modelling I was using Line 6 Pod Farm and it works fine, I plug in and I can hear my guitar.

But I have heard many good things about Guitar Rig and thought I should give it a go, but now here is my problem, my guitar is plugged in as normal, I open up Guitar Rig, but no sound, I have messed around with the Audio and MIDI Config etc. and as far as i know.....it should work!

But it doesnt, so can someone help me!

-Anthony
My Gear

Guitars:
Dean Cadillac

Amp:
Marshall JVM 205H
2x12 Harley Benton Cab w/V30's
#2
You might get some better answers in the recording forum.. They can help you with software issues.
#3
Quote by -Ravenous-
Right guys, here is my problem.

I run my guitar into my Toneport UX2, and for my amp modelling I was using Line 6 Pod Farm and it works fine, I plug in and I can hear my guitar.

But I have heard many good things about Guitar Rig and thought I should give it a go, but now here is my problem, my guitar is plugged in as normal, I open up Guitar Rig, but no sound, I have messed around with the Audio and MIDI Config etc. and as far as i know.....it should work!

But it doesnt, so can someone help me!

-Anthony


Make sure:
- bypass PODfarm/gearbox
- the Gearbox input is set on the line6 toneport
- the sound output is set on your standard sound output (speakers)
- sounds stupid, but turn on the sims in gearbox

I that doesn't do it I don't know
WTLTL 2011