#1
I didn't know whether to put this in Guitar Gear or Acoustic Guitar forum but anyway.

My acoustic/electric is an Epiphone AJ-100ce, and it has no volume or tone dials on the guitar. This wasn't that bad till when i played with distortion on my amp. I get really bad feedback, but not like high pitched, its really low and it doesnt really stop when u play...

anyway, is there anything i can buy or something to stop it, or do i just have to buy a longer lead and sit a few metre's away :p
#2
An acoustic electric isn't really meant to be used with distortion.........
Gibson SG Standard
Gibson Les Paul Traditional
Cort Explorer
Squire Standard Strat rebuilt with Fender USA parts
Squire Tele
Krank 1980
Orange Tiny Terror
Traynor YCV 50 Blue
Peavey Vypyr 75

Will fly for food. Call me Dylan
#4
but my electric has a broken wire, and soldering looks difficult hahah, i had to substitute
#5
It's not that hard, and guitars are a good place to start.
Gibson SG Standard
Gibson Les Paul Traditional
Cort Explorer
Squire Standard Strat rebuilt with Fender USA parts
Squire Tele
Krank 1980
Orange Tiny Terror
Traynor YCV 50 Blue
Peavey Vypyr 75

Will fly for food. Call me Dylan
#8
Like classic rocker said, its not really hard and a guitar is a perfect place to start - there aren't too many wires that will get in your way or cause confusion, the spots that you have to solder the wires too are relatively large, etc.

Have a go at it!
#9
Out of curiosity, what guitar is it?
Gibson SG Standard
Gibson Les Paul Traditional
Cort Explorer
Squire Standard Strat rebuilt with Fender USA parts
Squire Tele
Krank 1980
Orange Tiny Terror
Traynor YCV 50 Blue
Peavey Vypyr 75

Will fly for food. Call me Dylan