#1
Hey,

quick question, what kind of cabel do I need to extend my footswitch-cable? A normal instrument cable witch one side jack and one side jack connector?

Thanks!
Epiphone Les Paul Studio AW Ltd Run
Squier Classic Vibe 50s Tele
Epiphone PR 5 CE VS
Blackstar HT5 Head
Harley Benton 2X12" (Celestion V 30s)
Danelectro Cool Cat Drive CO1
Marshall Reflector RF1
Digitech Hardwire HW DL 8 Delay/Looper
#3
Look for a female/female connector. It's like 4 inches long with two "in's" at each end.
Then you can just plug a regular guitar patch cable into the other end to extend it.
I do this with my HT-5.
MARSHALL JVM 210H
PEAVEY JSX
KRANK 412
MESA 412
FENDER STRATS
DIMARZIO
CELESTION
#4
Quote by Van Noord
Look for a female/female connector. It's like 4 inches long with two "in's" at each end.
Then you can just plug a regular guitar patch cable into the other end to extend it.
I do this with my HT-5.

does it have to be stereo or mono? does it matter at all?
Epiphone Les Paul Studio AW Ltd Run
Squier Classic Vibe 50s Tele
Epiphone PR 5 CE VS
Blackstar HT5 Head
Harley Benton 2X12" (Celestion V 30s)
Danelectro Cool Cat Drive CO1
Marshall Reflector RF1
Digitech Hardwire HW DL 8 Delay/Looper
#5
Quote by roter$baron
does it have to be stereo or mono? does it matter at all?


Depends on your footswitch. My Vox footswitch has two buttons... so it uses a stereo cable and needs a stereo extension cable.
#6
^This. If it is one button its mono, if two its stereo.
Quote by Cathbard
Quote by Raijouta
Unless its electronic drums.

BURN THE WITCH!!!!!
#7
it has one button, but could i use this?
http://www.thomann.de/gb/the_sssnake_1802_adapter.htm
i know it is stereo, but would it work nontheless? i cannot find a mono connector on that page. it would be nice to get it from thomann, because i will order some stuff there soon anyways.
Epiphone Les Paul Studio AW Ltd Run
Squier Classic Vibe 50s Tele
Epiphone PR 5 CE VS
Blackstar HT5 Head
Harley Benton 2X12" (Celestion V 30s)
Danelectro Cool Cat Drive CO1
Marshall Reflector RF1
Digitech Hardwire HW DL 8 Delay/Looper
Last edited by roter$baron at Oct 6, 2009,