I just finished sanding my strat body to 320 grit and applied 2 coats of sanding sealer. How manty more coats should I apply? I plan on sanding the sealer to 400 grit then putting primer on it.
If you want a smooth finish, apply the sealer until it won't soak into the grain and the grain is gone.
Quote by Cal UK

...that's what Skeet always says anyway and he's a sex god.

Member of the official GB&C "Who to Listen to" list

I support Shay van Fani
I can supply WD Music, ABM and AllParts products to UK builders at DISCOUNTED prices!
if your trying to make the grain disappear sand between coats i usually apply about 5 coats for ash , whatever it takes .when you sand it your looking for a perfect finish no shiny spots you don't have to worry about it building up you always sand most if it away