#1
GODD DAYUMM my low E keeps wanting to go wayy out of tune everytime i mess around with the Edge Pro!

What the hell is the problem with itt?
The other strings go out jsut a tiny bit aswell..

What can I do to prevent thiss from happeninggg?
I keep having to tune it back in every 10 minutes if i mess with it, i was supposed to have to never really tune it back in once i'd tuned it in once,.. what's with thaaat?
#3
How long's this been happening? Did you change your strings recently?
...
You sure its locked <_< no offense but some people are kinda...
Breaking stereotypes by playing indie on a metal guitar.

Current Gear
- Epiphone Les Paul Standard (Plus Top)
- Crappy Strat Copy (Redecorated, looks snazzy)
- Ibanez Acoustic/Electric Guitar
- Ibanez RG1570 Mirage Blue
- Peavey Vypyr 30 Watt
#4
Quote by chuckmehh
new strings? and is the nut locked?

Yah, make sure your nut is tight.
lolololol
Quote by GodofCheesecake
Excessive punctuation!!!!!!!!! YES!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

Quote by dhutton
+infinity

I have infinity.
Quote by metharian
yea its way too much for my little stick lol
Last edited by sw1ss023 at Oct 17, 2009,
#5
Well I got new strings on it about a week ago so they should be fine by noww at least..
i've been going crazy wtih it for agesss..
#6
Did you stretch it before you put it on? If not it could take up to a week and a half depending how crazy you are with bends and etc.
Breaking stereotypes by playing indie on a metal guitar.

Current Gear
- Epiphone Les Paul Standard (Plus Top)
- Crappy Strat Copy (Redecorated, looks snazzy)
- Ibanez Acoustic/Electric Guitar
- Ibanez RG1570 Mirage Blue
- Peavey Vypyr 30 Watt
#7
Quote by Guitar2theface
How long's this been happening? Did you change your strings recently?
...
You sure its locked <_< no offense but some people are kinda...



Changed my strings a week ago,
It happens every day.. so evrytime it happens i try and stretch them EVEN more to make sure they're all properly stretched.

Yess, my nuts are tight ;]
#8
Quote by Chasing Shadows
Changed my strings a week ago,
It happens every day.. so evrytime it happens i try and stretch them EVEN more to make sure they're all properly stretched.

Yess, my nuts are tight ;]




Pluck the low E string and then press down on the string behind the nut. If there is a change in pitch then your nut is slipping.
You can call me Aaron.


♠♣♥♦
Out on parole, any more instances of plum text and I get put back in...
#11
Quote by Chasing Shadows
When i first got it set up.. I got it set up to be in Drop D.
Will this make ANY difference?



If you are now in standard then, yes you should adjust the spring tension in the back to accommodate.
http://www.youtube.com/user/chuckmehh
Randall RM100/Basson Cab
DBX166XL/BBE Sonic Maximizer
Boss NS-2, sCream Cheese 2.0 OD, Zakk Wylde wah
Custom Epiphones
Monster Cables
Awe-in-One picks..and more
#13
should help even out the bridge if it is not flat along the body of the guitar. look at your guitar from the side; if your bridge is raised out of its cavity or sunken in, you should adjust the springs until it is flat and in line with the body. Take off the back covering of your guitar and the springs are right there....Just tighten/loosen them (if it is raised out of the body you tighten, if it is sunken in you loosen).
http://www.youtube.com/user/chuckmehh
Randall RM100/Basson Cab
DBX166XL/BBE Sonic Maximizer
Boss NS-2, sCream Cheese 2.0 OD, Zakk Wylde wah
Custom Epiphones
Monster Cables
Awe-in-One picks..and more
#14
hmmm.. this sucks.

My trem is almost fully screwed into the thing, and it's stilll slightly stuck out..
:/
#15
how many springs do you have? You may need to add an additional spring. I have three and I can't really explain how they are attached, but they're not just straight....it's more like

/I\ does that make sense? haha
http://www.youtube.com/user/chuckmehh
Randall RM100/Basson Cab
DBX166XL/BBE Sonic Maximizer
Boss NS-2, sCream Cheese 2.0 OD, Zakk Wylde wah
Custom Epiphones
Monster Cables
Awe-in-One picks..and more
#17
Try the way I suggested....If it still doesn't work I really don't know what else to offer; maybe thicker gauged strings for more tension?
http://www.youtube.com/user/chuckmehh
Randall RM100/Basson Cab
DBX166XL/BBE Sonic Maximizer
Boss NS-2, sCream Cheese 2.0 OD, Zakk Wylde wah
Custom Epiphones
Monster Cables
Awe-in-One picks..and more