I have two 4 ohm cabs and one Epiphone Valve Jr. head. How do I connect the two cabs to the head??
Some heads have 2 outputs, use those two
is your amp suitable for 2 ohms?
it has 3 outrputs. one for 4ohms. one for 8 and one for 16
You would need to rig it up to run em in series. In parallel it will be 2 ohms and end up frying the amp. Its not easy to rewire the existing jacks on an epi as they are mounted to a PC board. I added some jacks to the back of my amp so I can run 2 4 ohm cabs. The existing 8 ohm jack goes to 1 of the new jacks and the other 2 new jacks are wired so the speakers are in series.