#1
well i`ve done some searching over the web,and i found out the specs for the guitar becker used (the blue carvin with maple neck): http://img17.imageshack.us/my.php?image=jason3h.jpg

so i talked to the local dealer of carvin in my country,and i`ve come up with this:
its based on DC127,with floyd rose tremolo (with locking nut).
maple neck & walnut body
Clear Gloss Finish ,Sapphire Blue Flame
Pointed Angled 6s Headstock, Headstock To Match Body Color
Birdseye Maple Fingerboard (Tung-Oiled), Dot Inlays , Jumbo Frets .055" H .110" W.
14in Fretboard Radius , M22SD Bridge Pickup , M22N Neck Pickup
Black Coils w/ Black Bezels ,Active/Passive Electronics (Guitars Have Coil Splitters, Phase Switch). Black Hardware, Elixir 942E Super Light Gauge .009 - .042,
Large White Logo , Dunlop Straplocks, Vintage Tweed Hardshell Case.

i was offered a flamed maple top,which would cost another 300 bucks,
and 1/2`` corner radius on body,which is like 95 bucks.
i dont know about those options,do i need them? will the current guitar still sound and look awesome without them? i need some help about that...

thanks!
#2
the wrong forum, need to go in the guitar building and customizing forum, the maple top will affect the tone, it`ll also look sweet when sprayed
#3
I'll see if Jof'll move this.
*reported* for the move.
R.I.P. Les Paul, 1915-2009

A man chooses, a slave obeys.