#1
I want to get the valveking head, but I dont have enough money for the matching cab.
If I have a Spider III cab can they be combined?
#2
It should work. Does the cabinet have a mono input or stereo input? Try to use the mono input and make sure the ohms switch on the Valve King matches the mono ohms on the cabinet.
#4
the valve king should have two speaker outputs...using speaker cable, run each output from the amp to a different input on the cabinet. Since the cabinet is wired at 8ohms per side, I believe you would need to set the switch on the back of the Valve King to 4 ohms (somebody correct me if I'm wrong).