ok I was at a flea market and i bought a fultron depth charge speaker cab. it has 2 speakers each are 4 ohms. i do not know the wats, volts or any thing about it. i want to know if i can connect it to my Vox DA-10. i am typing the electrical stuff (arnt i great with technology) exactly from the manuel...
Power amp output=maximum 10W RMS @ 8 ohms
Speaker=2x VOX original (6.5 inch 8 ohm)
Signal processing;
A/D conversion=24-bit
D/A conversion=24-bit
sampling frequency=44.1 kHz
Power supply= 6 c batteries or local AC voltage
Power consumption=16W

and if i can not connect them is there a type of converter thing i could use to make them work together. Thank You
You'd have to use a speaker jack, which, if it doesn't have one, would involve modding the amp. If you know how to solder and are competent with electronics, it may be fairly simple. If you don't know what you're doing, you could break it.

I don't think it would be worth it. You'd be better off getting a better amp and hooking it up to the cab.
Quote by DeathByDestroyr
What the hell is a G&L.

Quote by Flux'D
Gay & Lesbian I think, the box smelled funny
Greg what did you send me??