#1
Got a module modded a few days ago. It was a discontinued brown module.
I sent it to Jaded Faith again (I have 3 modded modules from him) to try and get a JCM800 tone out of it since it sounded to much like a plexi.

He took it, cranked as much gain out of it as he could and then I asked for a pull pot to cut the gain for some crunch .

Overall sound, in my opinion is fantastic. It's practically as close as you can get to a JCM800 on the MTS series without buying one.

Ok, ok. I know all you guys want are PICS AND CLIPZ so here you go.

Pictures:










Cliptures:
http://www.box.net/shared/8kkos1d0yo

Let me know if you think it's pretty close to a JCM800.
Guitars:
Ibanez UV777P
Ibanez RGD2127FX
Ibanez RG3120TW
Ibanez RGD7321
Ibanez RG6003FM
Ibanez SA160
Jackson Slatxmg3-7
Amps:
Baron Custom Amps K88
Rivera Knucklehead TRE
Fryette Sig: X
Randall RM4 /w Modded modules
Cabs:
Mesa 4x12
Bogner 4x12
Peavey 4x12(K85s)
#2
Nice, I don't know about how close it is, but it certainly sounds good!

HNMD!
Wait.



Roger Waters - 12th May!
#3
Also sorry guys I panned them. Left 60% is Brown with a TS-9, Right 60% is without.

Tuning Drop B lol..
Guitars:
Ibanez UV777P
Ibanez RGD2127FX
Ibanez RG3120TW
Ibanez RGD7321
Ibanez RG6003FM
Ibanez SA160
Jackson Slatxmg3-7
Amps:
Baron Custom Amps K88
Rivera Knucklehead TRE
Fryette Sig: X
Randall RM4 /w Modded modules
Cabs:
Mesa 4x12
Bogner 4x12
Peavey 4x12(K85s)
Last edited by kylendm at Nov 15, 2009,
#4
sounds good. Quite a bit darker than a normal 800, more gain than a stock one too. Good work though


edit: didn't tralize that you where using a ts9 in the clip, gain is more spot on now, but I still stand it being a tad too dark
I would rather be a good liver than have one
Last edited by twistudriffer at Nov 15, 2009,
#5
Yeah it does have a bit more gain on it. It was only recorded at gain around noon on the boost function and it wasn't even cranked at all. Level and Master were at maybe 10 o clock. I does start to brighten up at higher volume but your right it is a quite a bit darker.
Guitars:
Ibanez UV777P
Ibanez RGD2127FX
Ibanez RG3120TW
Ibanez RGD7321
Ibanez RG6003FM
Ibanez SA160
Jackson Slatxmg3-7
Amps:
Baron Custom Amps K88
Rivera Knucklehead TRE
Fryette Sig: X
Randall RM4 /w Modded modules
Cabs:
Mesa 4x12
Bogner 4x12
Peavey 4x12(K85s)
#6
Alright, here's another clip for everyone.

It's the same clip but it has added riffs near the end.

http://www.box.net/shared/sf1n8o9uln

This time I put my Baron module on the right. In my opinion it didn't sound all that great this time. The module is kind of like the 5150 it sounds it's true best cranked to hell. But the new mod sounds pretty decent at lower volumes.

Also I'm working on a faceplate. Let me know what you think.

Guitars:
Ibanez UV777P
Ibanez RGD2127FX
Ibanez RG3120TW
Ibanez RGD7321
Ibanez RG6003FM
Ibanez SA160
Jackson Slatxmg3-7
Amps:
Baron Custom Amps K88
Rivera Knucklehead TRE
Fryette Sig: X
Randall RM4 /w Modded modules
Cabs:
Mesa 4x12
Bogner 4x12
Peavey 4x12(K85s)
#8
Thanks mate
Guitars:
Ibanez UV777P
Ibanez RGD2127FX
Ibanez RG3120TW
Ibanez RGD7321
Ibanez RG6003FM
Ibanez SA160
Jackson Slatxmg3-7
Amps:
Baron Custom Amps K88
Rivera Knucklehead TRE
Fryette Sig: X
Randall RM4 /w Modded modules
Cabs:
Mesa 4x12
Bogner 4x12
Peavey 4x12(K85s)
#10
Thanks man, do you have anything coming?
Guitars:
Ibanez UV777P
Ibanez RGD2127FX
Ibanez RG3120TW
Ibanez RGD7321
Ibanez RG6003FM
Ibanez SA160
Jackson Slatxmg3-7
Amps:
Baron Custom Amps K88
Rivera Knucklehead TRE
Fryette Sig: X
Randall RM4 /w Modded modules
Cabs:
Mesa 4x12
Bogner 4x12
Peavey 4x12(K85s)
#12
Lol sorry..

I thought you had a MTS series amp.
Guitars:
Ibanez UV777P
Ibanez RGD2127FX
Ibanez RG3120TW
Ibanez RGD7321
Ibanez RG6003FM
Ibanez SA160
Jackson Slatxmg3-7
Amps:
Baron Custom Amps K88
Rivera Knucklehead TRE
Fryette Sig: X
Randall RM4 /w Modded modules
Cabs:
Mesa 4x12
Bogner 4x12
Peavey 4x12(K85s)
#14
"Parshall".





. That's awesome. I would totally buy that faceplate. That does sound pretty close to a boosted JCM.

HNMD
--

How do you say "I'm okay" to an answering machine?

--
#15
Well it is a partial Marshall so i figured the name fit.

I might do another sound clip today or tomorrow.

Might do the song "Livin' On The Edge" :P

I do sell the face designs for $25 a face but, ya need an MTS module. :P
Guitars:
Ibanez UV777P
Ibanez RGD2127FX
Ibanez RG3120TW
Ibanez RGD7321
Ibanez RG6003FM
Ibanez SA160
Jackson Slatxmg3-7
Amps:
Baron Custom Amps K88
Rivera Knucklehead TRE
Fryette Sig: X
Randall RM4 /w Modded modules
Cabs:
Mesa 4x12
Bogner 4x12
Peavey 4x12(K85s)