#2
Dante-

I thought it was good. Pretty much nailed the cover with good timing and chord progression. Was that through your MG, RP, or software? Areas to work on would be making the riffs a little tighter and cut down on the clipping. Otherwise, good job.

I normally do not post in here but I see you are a 311 fan and you have an RP. Therefore, I decided to give you this as my C4C. It was done some time ago and is not my best work but here it is. It is not a full blown cover either, just some of the riffs off Beautiful Disaster.

http://profile.ultimate-guitar.com/311ZOSOVHJH/music/all/play437943

This was with my RP250 into a Valveking using a camera as a microphone.



311