#1
I'm planning on building a small pedalboard. I have a EHX Metal Muff, Digitech Bad Monkey, and MXR Phase 90 right now. Will I need any sort of adapters if I get the 1 spot and a daisy chain?

1 spot: http://accessories.musiciansfriend.com/product/Visual-Sound-1-SPOT-SpaceSaving-9V-Adapter?sku=151686
daisy chain: http://accessories.musiciansfriend.com/product/Visual-Sound-MultiPlug-5-Cable-for-1-SPOT-Adapter?sku=151687
#2
I think the Muff has a different input jack, have a look at the pedal.
Gear:
Fender Stratocaster
Silvertone 1448L
TC Electronic Polytune
Fender Blues Jr.
More in profile...
#7
Quote by denied
I strongly caution you against using daisy chains. You will probably be fine with three pedals, but beyond that you are going to start getting pretty noisy. For the 30$ you are planning on spending I have gotten a 5 output power block on ebay.

...which probably won't have isolated outputs and thus being a daisy chain in a metal box.

Note: I run 5 pedals of a Godlyke adapter and I have no noise issues.
#8
Quote by WtrPlyr
...which probably won't have isolated outputs and thus being a daisy chain in a metal box.



+1

I've used the one spot in the past with a huge pedalboard...the only time it was every noisy was when I used my wah...so I put it on its own adapter and fixed the problem. The one spot isn't noisy at all.
#9
I got the One Spot when the crapass adapter that came with my BCB-60 died. It does the job, but I get a little noise if I'm using distortion (and yes, I crank it).