#1
i was trying to adjust the intonation on my guitar (ART300) and when i loosened the screw as far as i could the guitar was still sharp.

does anyone have any idea how to fix this? i was thinking lighter strings but im not sure if that would make any difference.
BASS GEAR:
Fender Bassman 250 2x10
Squier MB-5
Tanglewood Premier TW155 acoustic bass

GUITAR GEAR:
Ibanez ART300
Fender GDC-200SCE
Peavey studio chorus 70

PEDALS:
Ibanez SM-7
Ibanez PH-7
DOD Bass Chorus
#4
Heres a list;

Flip the saddle,
buy new strings,
adjust the truss rod (if needed).
Doubt its a Floyd guitar, but a string retainer helped me.
Check the nut for length issues, tons of crap you can do, I think that about covers it.
Probably a little bit more that I dont know.
I AGREE
#5
thanks for the advice hobo
BASS GEAR:
Fender Bassman 250 2x10
Squier MB-5
Tanglewood Premier TW155 acoustic bass

GUITAR GEAR:
Ibanez ART300
Fender GDC-200SCE
Peavey studio chorus 70

PEDALS:
Ibanez SM-7
Ibanez PH-7
DOD Bass Chorus
#6
you may have to lower the action somewhat!
and adjust the truss rod correctly, It really
shouldn't take much adjustment to get that
correct. Poor truss rod or action can dramatically
effect your intonation.

The relief or straightness in your neck is really important
Ibanez AEL10E BLK- W/ Graph Tech Nut, Saddle and Pins
Duncan Woody XL Pickup w/ stock fishman EQ

Schecter C1+ Darksunburst w/ SH-4 (N) & SH-6 (B) 24.75"
Gain boost Switch
11-14-21w-38w-49w-60w D'Addario strings
ENGL Fireball+Savage+Vader Cab