#1
now that i have your attention, i have never bought a guitar nut, and i am looking for a bone one to fit an ibanez rg2. must ship to maryland. enlighten me
#2
Get a new one made. Simple instructions are as follows:
1. Find a reputable guitar tech.
2. call him, ask him how much it would be to get a nut made and installed
3. Bring your guitar to him.
4. Pick it up a few days/weeks later, depending on the wait.
5. ?????
6. PROFIT!
Current Gear:
LTD MH-400 with Gotoh GE1996T (EMG 85/60)
PRS SE Custom 24 (Suhr SSH+/SSV)
Ibanez RG3120 Prestige (Dimarzio Titans)
Squier Vintage Modified 70s Jazz V
Audient iD22 interface
Peavey Revalver 4, UAD Friedman BE100/DS40
Adam S3A monitors
Quote by Anonden
You CAN play anything with anything....but some guitars sound right for some things, and not for others. Single coils sound retarded for metal, though those who are apeshit about harpsichord probably beg to differ.
#3
Quote by oneblackened
Get a new one made. Simple instructions are as follows:
1. Find a reputable guitar tech.
2. call him, ask him how much it would be to get a nut made and installed
3. Bring your guitar to him.
4. Pick it up a few days/weeks later, depending on the wait.
5. ?????
6. PROFIT!

i've been looking into it. i was just curious if you all knew of any good parts dealers who would ship one out. i can do the replacement no problem. i'm just looking for the best way to get one. your advice is in mind though buddy
#4
Get a graphtech Nubone nut, better than bone, acts like bone you may like it
Ibanez AEL10E BLK- W/ Graph Tech Nut, Saddle and Pins
Duncan Woody XL Pickup w/ stock fishman EQ

Schecter C1+ Darksunburst w/ SH-4 (N) & SH-6 (B) 24.75"
Gain boost Switch
11-14-21w-38w-49w-60w D'Addario strings
ENGL Fireball+Savage+Vader Cab
#5
^that's a good idea. Problem is, Ibanez FB's have something around 15 3/4" for a radius, in other words, flatter than basically anything but acoustic FB's.
Current Gear:
LTD MH-400 with Gotoh GE1996T (EMG 85/60)
PRS SE Custom 24 (Suhr SSH+/SSV)
Ibanez RG3120 Prestige (Dimarzio Titans)
Squier Vintage Modified 70s Jazz V
Audient iD22 interface
Peavey Revalver 4, UAD Friedman BE100/DS40
Adam S3A monitors
Quote by Anonden
You CAN play anything with anything....but some guitars sound right for some things, and not for others. Single coils sound retarded for metal, though those who are apeshit about harpsichord probably beg to differ.
#6
I think they make some electric guitar ones as well, you may have to custom order it from Graphtech itself He may have to go Tusq instead
Ibanez AEL10E BLK- W/ Graph Tech Nut, Saddle and Pins
Duncan Woody XL Pickup w/ stock fishman EQ

Schecter C1+ Darksunburst w/ SH-4 (N) & SH-6 (B) 24.75"
Gain boost Switch
11-14-21w-38w-49w-60w D'Addario strings
ENGL Fireball+Savage+Vader Cab
Last edited by xDarrellx87x at Dec 12, 2009,
#8
either way, its better to get a guitar tech, unless you have the money to buy
gauged slotted files which cost $20 a pop
Ibanez AEL10E BLK- W/ Graph Tech Nut, Saddle and Pins
Duncan Woody XL Pickup w/ stock fishman EQ

Schecter C1+ Darksunburst w/ SH-4 (N) & SH-6 (B) 24.75"
Gain boost Switch
11-14-21w-38w-49w-60w D'Addario strings
ENGL Fireball+Savage+Vader Cab