So I just had a question about the MSDI on the new 6505 combo. Does it mean that you can just connect it straight to your computer without using an interface. And also, do you use a usb cable or a 1/4 in cable.
i recommend using an interface. even if your amp doesn't need one, it usually (key word, usually) sound better through an interface. and depending on the interface it could use either usb or 1/4"
it's a 1/4 inch, I didn't try mine yet but might later tonight (with my interface) It should work ok with the mic-in on your computer though I guess, some latency when recording and monitoring if you can put up with that..
Ok. Thanks guys.