#1
I tend to get a lot of hum from my guitar. I looked at the jack and it looks like it's not grounded. Both parts of the jack are soldered together with the little white wire. Should I solder a wire from the jack to the ground of my wiring or leave it that way? The guitar is a cheap Washburn X-Series.

P.S. sorry the any error, english is not my mother tongue,

My first lolstack
Quote by whitenihilist




If you wish to make an apple pie from scratch, you must first invent the universe.
Last edited by bellette at Dec 24, 2009,
#2
there should be a braided shield around the white wire, connect that to the ring. the tab that connects to the tip should have the white wire soldered to it. the picture is a little blurry; hard to really see what's going on with the jack. check out the wiring thread, there's a link in the central hub as well as my sig