#1
Thinking of getting a Vintage VS6 (SG model)

http://www.reidys.com/index.pl?submit=View_PLU&PLU=6677

But I want to replace the small pickguard with one of the bigger "batwing" style ones as shown on this sg:


http://mexthai.tarad.com/shop/m/mexthai/img-lib/spd_20090730162715_b.jpg


Can someone link me a pickguard that will fit on the Vintage VS6? and also is it an easy job, do you have to remove the humbuckers and put them back in?

Thanks,
Gear:

Vintage VS6 (Wine Red)

Marshall VS100 Valvestate head with 4x12 angled cab

Squier Strat (Fiesta Red) 90's, Korean
#2
You shouldn't need to remove anything, but you WILL need to drill new holes for the screws, (unless you leave it, although I wouldn't suggest this as it could easily get caught, damaged and it generally doesn't look right)...


HELLO!

#3
Will the new scratchplate cover over the previous screwholes and all?
Gear:

Vintage VS6 (Wine Red)

Marshall VS100 Valvestate head with 4x12 angled cab

Squier Strat (Fiesta Red) 90's, Korean
#4
most of them SHOULD (I say should depending on the quality of the guard you get.. as if you buy a few $ one it's gunna lack quality).. They most likely will but just be careful which one you get.


HELLO!

#5
So would an Epiphone G-400 SG pickguard fit on or would I need a Gibson one or are the Gibson and Epiphone SG the same shape anyway?

Basically, would a Gibson pickguard fit on an Epiphone G 400?
Gear:

Vintage VS6 (Wine Red)

Marshall VS100 Valvestate head with 4x12 angled cab

Squier Strat (Fiesta Red) 90's, Korean
Last edited by Eurozeppelin at Dec 31, 2009,