#1
The guitarist of my bands amp stopped working and we're hoping its just a fuse. The amp is at our lock out and he is asking what kind of fuse he needs. The model is a Crate VFX5212.

How can I find out what fuse he needs? I can't find it on the interwebz ;[
#2
Crate VFX5212T Specifications:

* OUTPUT POWER RATING 50Watts RMS @ 5 % THD 16 ohm load 120 VAC
* SIGNAL TO NOISE RATIO 70dB Typical
* GAIN Channel A: 62 dB
* Channel B: 98 dB
* EQ - CH. A Treble: 30dB range @ 10kHz
* Mid: 6dB range @ 600Hz
* Low: 30dB range @ 80Hz
* EQ - CH. B Treble: 10dB range @ 4kHz
* Mid: 10dB range @ 1kHz
* Low: 12dB range @ 100Hz
* PRESENCE 18dB range @ 20kHz
* SPEAKER SPECS VFX 5112: 1 X 12", 60w, 16 ohm, 1.75" voice coil diameter, 38oz. magnet
* VFX 5212: 2 X 12", 60w, 8 ohm, 1.75 voice coil diameter, 38oz. magnet
* PREAMP TUBES (4) 12AX7A
* POWER TUBES (2) EL34
* POWER REQUIREMENTS 120 VAC, 60 Hz, 200VA
* 100/115 VAC, 50/60 Hz, 200VA
* 230 VAC, 50/60 Hz, 200VA
* SIZE AND WEIGHT VFX 5112: 23"W x 19" H x 10"D, 48 lbs.
* VFX 5212: 28"W x 21" H x 11"D, 58 lbs.

Not sure if that helps, though.
#3
You didn't check to see if the fuse had blown?

It would have made sense to check, even if just to see what size it takes.
#4
it should say what type below the fuse casing thing. or just look around the amp it'll tell you the voltage and all that jazz.
Member #40 of the Steve Irwin Memorial Club, pm Clincher09 to join.
#5
if its a transistor amp, there are no fuses to my knowledge that are a quick fix. sorry.