Hey folks.

I've got an old Japanese modle strat (86 or 87) and I want to add another pick up. Here's the deal:

Now it has just one bridge position humbucker and one volume knob. Nice and simple. But too simple.

I want to add a neck position single coil pickup, a 3-way selector switch and tone control. So I'll have to dig out the cavities for that stuff. I don't know jack about doing this sort of thing so any comments or advise would be cool. I might ask about getting a guitar shop to do the work but that could be expensive.

Router with templates is the preferred method. another method that I use sometimes is the forsner bit chisel method. works fairly well and is much easier.