#1
I'm trying to get hold of a Gold Tune-O-Matic & Stoptail bridge.
I hear that quite a chunk of your tone lives in your bridge. Where would I go about buying a good quality one and how much am I looking to spend?

Thanks.
ᶌῖᶌα ɭα ɌεᶌσɭƲʈιʘϰ
#4
Hmm, I was looking to spend a little less than that. Anything else?

EDIT: ^ Will measure and post in a sec.
ᶌῖᶌα ɭα ɌεᶌσɭƲʈιʘϰ
Last edited by Vauxite at Jan 7, 2010,
#5
Quote by mcjosh



If you're going to spend an insane amount of cash on a locking bridge/tailpiece set, for a little more you can get the Gotoh 510 from Stewmac.com. It has locking saddles, mounts and studs and is probably the best TOM bridge on the market. The tonepro bridge is a $25 bridge with 50 cent set screws on each end. If you're looking for a quality, non locking TOM, you can get a decent Gotoh set from stewmac for 40-50 bucks.
Last edited by Jason43 at Jan 7, 2010,
#6
Quote by Vauxite
Hmm, I was looking to spend a little less than that. Anything else?

EDIT: ^ Will measure and post in a sec.

Here's a bridge, but I can't find a cheaper gold stopbar, http://accessories.musiciansfriend.com/product/TonePros-Standard-Locking-Tuneomatic-Bridgesmall-posts?sku=306150

40 GBP
ಥ_ಥ ಠ_ಠ ಠ_ೃ ·ಏ· ಢ_ಢ


E-Married to the sexy DarkConcertine


and Jon777 .


#7
I like the tune o matic from allparts with the roller saddles.

You could have just googled this though. C'mon man.
Just call me Bobby
Member of the official GB&C "Who to Listen to" list
Quote by mikeyElite
you build guitars worthy of sexual favors

Quote by Invader Jim
if this party gets any livelier a funeral is gonna break out.
#8
Quote by metalwarrior40
I like the tune o matic from allparts with the roller saddles.

You could have just googled this though. C'mon man.


I did Google it, but I wasn't sure of how much I need to spend. Whether or not £25 is acceptable or not.
ᶌῖᶌα ɭα ɌεᶌσɭƲʈιʘϰ
#9
Quote by Way Cool JR.
They also have the roller saddles to.


The rolling TOM looks like it's worth buying, there are no measurements though
ᶌῖᶌα ɭα ɌεᶌσɭƲʈιʘϰ
#10
http://www.stewmac.com/shop/Bridges,_tailpieces/Electric_guitar,_Tune-o-matic_bridges/Locking_Roller_Bridge.html

Kinda like the GFS one, but i trust StewMac just a bit more than GFS. Plus it has measurements.
R.I.P. Les Paul, 1915-2009
Quote by Shinozoku
You have a walnut stop sign banjo-tar signed by MAB

˙ןooɔ sı uosɐǝɹ ןɐǝɹ ou ɥʇıʍ ƃıs ɹnoʎ uı ʇxǝʇ uʍop ǝpısdn ƃuıʇʇnd
Quote by Scowmoo
You deserve an Awesome Award for Awesome People.
Seriously.

Stop Sign Guitar? HELL YES!
#11
Quote by Vauxite
I did Google it, but I wasn't sure of how much I need to spend. Whether or not £25 is acceptable or not.


I can do you a Gold TonePros TOM and tailpiece for £75 from wdmusic.co.uk or have a look on there yourself for bits in bridges and tailpieces (under hardware), can do you 20%.

You will need to know your measurements though.
Quote by Cal UK

...that's what Skeet always says anyway and he's a sex god.


Member of the official GB&C "Who to Listen to" list


I support Shay van Fani
I can supply WD Music, ABM and AllParts products to UK builders at DISCOUNTED prices!
#12
Quote by Skeet UK
I can do you a Gold TonePros TOM and tailpiece for £75 from wdmusic.co.uk or have a look on there yourself for bits in bridges and tailpieces (under hardware), can do you 20%.

You will need to know your measurements though.


Hmm, that doesn't sound too bad, I may take you up on that
ᶌῖᶌα ɭα ɌεᶌσɭƲʈιʘϰ