#1
Hey guys. I'm using an Ashdown Fallen Angel 60 DSP Combo (2x12), and I was wondering if I could connect up a head to it and use the combo as a cabinet?

http://www.ashdownmusic.com/tech/manuals/FallenAngelManual05.pdf

Page 9 of that PDF shows the back panel, could anyone enlighten me on how I would go about connecting a head to it?

At the minute I have a lead plugged into the jack labeled "Internal Speaker 8 Ohms", would it be as easy as just plugging the head into this and choosing the correct impedance using the little slider switch to the right hand side?

Cheers.
#2
yup pretty much
I shouldn't post when drunk..



07 LTD MH400NT SD SH2/SH5
15 Jackson SLATHX-m 3-7 Slime green
Squier std tele (modded to hell)

Engl Powerball
Laney Ironheart 60h
Zilla Superfatboy 2x12 v30's

Pedals
#4
Ok so I just checked and the cable that's going into the "Internal Speaker 8 Ohms" jack is coming directly from the speakers. If I plugged this straight into an amp head would it work right?
#6
Quote by SwampAshSpecial
thats fine but don't use a head over 60w or you'll blow the speakers.

Don't use over a 60w Head?
Cheers
#7
what head you have in mind anyway?
I shouldn't post when drunk..



07 LTD MH400NT SD SH2/SH5
15 Jackson SLATHX-m 3-7 Slime green
Squier std tele (modded to hell)

Engl Powerball
Laney Ironheart 60h
Zilla Superfatboy 2x12 v30's

Pedals