#2
Run four springs (two on each side), and use .11 gauge strings. I'd say you want your 6th string around .48-.52.
I play guitar in a ska band.
Modded MIM Strat > Fender Tuner > Bugera V55HD > Custom built 2x12
#3
Quote by cgolden
Run four springs (two on each side), and use .11 gauge strings. I'd say you want your 6th string around .48-.52.


err i cant do the spring because then i have to go to the guitarcenter (by bike) witch is 10 miles away and im busy overweekends so what strings would you say for 3 spring? but also thanks for replying
#4
Quote by Darkdevil1584
err i cant do the spring because then i have to go to the guitarcenter (by bike) witch is 10 miles away and im busy overweekends so what strings would you say for 3 spring? but also thanks for replying

Ahh that could be a problem. But I'd go with 10s on the high C and 42s-28s on the low C.

Edit: And it's no problem. That's what these forums are for.
I play guitar in a ska band.
Modded MIM Strat > Fender Tuner > Bugera V55HD > Custom built 2x12
Last edited by cgolden at May 18, 2010,
#5
wait i think i can steal my fender strats spring. but thank you again. ALSO if you used 3 springs for the 48-52 guage what could happen?