#1
For the series picture?
http://www.svvintageamps.com/images/2-speaker-wiring-diagram.gif

I was taught you cant run positive to ground, and the wire would just burn up?

reason for this is I bought an Eminence Private Jack in 8ohms, and i want to wire it up with an 8ohm Eminence Govenor for a 2x12 cab since my amps lowest impedance is 8 ohms i have to wire it in series for a 16 ohm load
Gear:
Epiphone Les Paul Standard
Blackstar HT-5 Head
Homemade 1x12 from a combo cab with an Eminence PJ
Quote by ikey_
perhaps i have a superb epiphone. the japanese man must have gotten laid and won the lottery right before he made my guitar. whatever.
#2
running something marked positive to ground won't necessarily ruin anything.. but there aren't any positive terminals being grounded here anyway

if your amp has a 16 ohm tap, then wire your speakers in series like the top picture shows
#3
Quote by james4
running something marked positive to ground won't necessarily ruin anything.. but there aren't any positive terminals being grounded here anyway

if your amp has a 16 ohm tap, then wire your speakers in series like the top picture shows


yeah it has a 16 ohm jack so thats how im going to wire the cab in series
Gear:
Epiphone Les Paul Standard
Blackstar HT-5 Head
Homemade 1x12 from a combo cab with an Eminence PJ
Quote by ikey_
perhaps i have a superb epiphone. the japanese man must have gotten laid and won the lottery right before he made my guitar. whatever.