#1
My pedal just randomly stopped working. I don't understand because it plays the drum loops but the guitar sound won't come out. I turned up my amp and the volume on my guitar and the volume on my pedal and still nothing. What could it be?
#5
I'm assuming its the RP70. Try plugging your guitar directly into the amp. If the drums still work your 1/4" output is fine, the input may be loose.

Isolate the problem!
"If you're looking for me,
you better check under the sea,
because that's where you'll find me..."
#6
Quote by DeathByDestroyr
I'm assuming its the RP70. Try plugging your guitar directly into the amp. If the drums still work your 1/4" output is fine, the input may be loose.

Isolate the problem!

This. Make sure it's actually the pedal, and not the guitar. Try some other guitars and see if it works then.
#7
Could be your guitar, the cable from your guitar to the pedal or the input on the pedal.
Imagination is more important than knowledge...
It is a miracle that curiosity survives formal education.
- Albert Einstein -