#1
I want to drop an edge pro into an older RG350 that has an edge pro II (NOT an edge III) in it. I did some research to see if this would work, and I only came across one problem. An edge pro would always come out of a guitar with a neck radius of 430 mm, while the guitar I'm putting it in to has a radius of 400 mm. Will the 30 mm difference in the neck radius create an issue with playability or anything else?
Gear:
Ibanez RG570 circa 1993
Ibanez S2020XAV
Carvin DC127
EVH 5153 50w
Orange PPC112
AxeFX II
#2
It'll hardly be noticeable, but you can shim the saddles if you want to compensate for the radius difference.
#3
Quote by littlephil
It'll hardly be noticeable, but you can shim the saddles if you want to compensate for the radius difference.


Upon further research I found you could do that. Thanks anyways though
Gear:
Ibanez RG570 circa 1993
Ibanez S2020XAV
Carvin DC127
EVH 5153 50w
Orange PPC112
AxeFX II