So I'm wiring up two single coils(DiMarizo Area 59' and 61') and I just want to check if I'm doing it right. I wired the red wires to the switch, and the green to the first pot(master volume) I wired the cap to the second pot(tone) one end on the first lug and the other to the base of the pot.

I'm following this diagram: http://www.seymourduncan.com/support/wiring-diagrams/schematics.php?schematic=1h_2s_1v_2t_5w

I know it's 3 single coils diagram, and I'm putting a Barenuckle Warpig in the bridge, a humbucker, but the wiring should be the same, right?

I'm looking at the pots right now, and there some big ass 500k pots, they're really wide, I'm skeptical that they will fit in my strat.

Help please.