i bought a used guitar, ibanez ic300, for 200 bucks. i went to restring it, apparently the guy hadnt done it in years because the bushings had all fatigued except one. anyway, the tuning pegs are crap and outdated but i dont want to get new ones right now because i would need to pay 50 dollars to have them installed on top of the tuners themselves because i would need to drill new holes. i want to just replace the bushings but very few stores carry them and the websites are bad about listing dimensions. does anybody know if bushings are universal?
i thought about it, but the holes are the tiny ones that the little pegs go into to hold the tuners in place. i dont have anything that can drill a hole that small nor do i know if i would even have the skill to drill such small holes