#1
Okay then, well, I have finally done up a design for the guitar I want to build.
Image is attached.
The specs:
Graphtech Tusq XL Black nut
27.5" Scale
Sperzel Tuners
Bare Knuckle Nailbomb pickups
2x Vol, 2x Tone, Split/Series/Parallel switches, Phase switch for neck pup, kill switches and a 3 way blade.
Graphtech Resomax NV2 tunomatic bridge with 6mm posts
Carbon Fibre reinforced set neck (australian Maple), Thick, Deep D profile. My initials carved into the headstock, which has a thin layer of Jarrah or gidgee on top, thick enough for the carved logo.
The body timber will be about 550mm wide, 800mm long and 60mm thick. Most likely Tas Blackwood or Oak.
Pic attached. Only a sketch... I have better sketches of it somewhere.

Buying timber, tools and parts as soon as I can.
Attachments:
P7110397.JPG
#2
If anyone is wondering, the leftover pieces of wood from the body timber will be used for woodturning and carving and such... new hobby hopefully.
#6
You gonna poke someone's eye out with that.
G͔͓̅e͎͉̟̽ͬ͐̎̃͐ͨͅå͈͖͕̹̤̟̐̏͋ͅr̩͕̫̰̗s̹̳̼ͥ̒̍̄̅ͥ̚:


ESP Standard Eclipse I CTM VW
ESP LTD Deluxe H-1001
ESP LTD Deluxe Viper-1000 STBC
ESP Edwards E-EX-100STD
Warmoth Paulcaster "Tiger"
Tanglewood TW170 AS
Vox Tonelab ST
Blackstar HT-1R


#7
Quote by sstony
Looks cool but, Being able to play past the horn looks impossible.

Hah, just realised. Going to widen the gap there a bit...
#8
hah, hminh, your avatar should be animated to poke out an eye, would be awesome
Only the horns will actually be pointy, and even then it won't really be pointy, they will be rounded a bit so they don't break!
It's kind of based on, or inspired by, an ESP F, and then made huge with a massively long neck. No widdly-woo neck here! ;D
#9
lol.. nuts!
G͔͓̅e͎͉̟̽ͬ͐̎̃͐ͨͅå͈͖͕̹̤̟̐̏͋ͅr̩͕̫̰̗s̹̳̼ͥ̒̍̄̅ͥ̚:


ESP Standard Eclipse I CTM VW
ESP LTD Deluxe H-1001
ESP LTD Deluxe Viper-1000 STBC
ESP Edwards E-EX-100STD
Warmoth Paulcaster "Tiger"
Tanglewood TW170 AS
Vox Tonelab ST
Blackstar HT-1R


#11
tjis looks pretty awesome, hope to see this buildup
My Gear:

Guitar #1: 1997 Fender MIM Strat
Guitar #2: 2007 Epi SG (G-310)

Effects: Roland DS-1 Distortion (for switching in distortion quickly, NOT cause I want a "l33t brootalz tonz!")
Amp: Roland Microcube