I need some help with the On/Off switch on my MXR EVH Flanger. A little electrical noise is the norm with these analog switches is normal, sure. But for some reason lately, it pops loudly when I engage it. I suspect this is because the contacts on the switch need cleaning due to the fact it's not a pedal I often use. Anyone know how to clean these style of switches? I don't want to pull this apart until I'm sure I can spray a little contact cleaner into it.
Quote by 311ZOSOVHJH
If you take the pedal apart the on/off switch should be easy to see and clean

I would actually clean the input/output jacks first without taking it apart as first step

Alright, I'll do the jacks first. the reason I was wondering about the switch is some times I've seen them without a hole to spray contact cleaner into and wanted to make sure that wasn't the case before disassembly.